How to install the toilet exhaust fan?
Date：2017-02-13 Hits：
Toilet Exhaust fan installation is generally a professional to install, but for ordinary users, understand the installation of exhaust fan can check the exhaust fan installation is reasonable. The following small series on the specific to tell you the method and steps of the ventilator.
Ventilation fan before installation
1, fan installation should be carefully check the machine is not intact, the fastener bolts are loose or falling, the impeller has no bump, carefully look at the fan leaf or louver in the transport process has no deformation damage.
2, the selection of the tuyere environment, should pay attention to the opposite side of the Tuyere 2.5-3M can not have too much obstruction.
Fan installation
1, installation of a smooth: fan installation should pay attention to the horizontal position of the fan, adjust the fan and the level of the ground plane. Fan installation can not be skewed appearance.
2, install the ventilator should make the motor's conditioning bolts in a convenient operation. In order to adjust the fan belt tightness.
3, when installing the fan bracket, must let the bracket and the foundation plane level be consistent, when necessary in the ventilator side installment angle carries on the reinforcement.
4, after the installation of the fan, to the surrounding tightness of the view. If there is open space, may use the sunlight board to seal the glass glue.
End of exhaust fan installation
1. After installation, check the inside of the fan to see if there is something left and sundry. Use the hand or lever to toggle the fan leaves, to see if there is too tight or rub the appearance, there is no obstruction of the change of goods without abnormal appearance, can be tested.
2, when the operating fan oscillation or the motor has "hum" abnormal movement or other abnormal appearance should be stopped to view, to be corrected after the operation.
Ventilation Installation Considerations
The ventilator must be solid and strong when installed, and it is 2 apart from the ground. 3m above;
The gap between the fan and the roof must reach above 5CM.
Suction ceiling fan Do not install in the smoke, dust more places, at the same time to avoid installation in the vicinity of High-temperature sources.
The wall of the electric fan can be ventilated in each place, also can be used to smoke.
Ventilation fan before installation
1, fan installation should be carefully check the machine is not intact, the fastener bolts are loose or falling, the impeller has no bump, carefully look at the fan leaf or louver in the transport process has no deformation damage.
2, the selection of the tuyere environment, should pay attention to the opposite side of the Tuyere 2.5-3M can not have too much obstruction.
Fan installation
1, installation of a smooth: fan installation should pay attention to the horizontal position of the fan, adjust the fan and the level of the ground plane. Fan installation can not be skewed appearance.
2, install the ventilator should make the motor's conditioning bolts in a convenient operation. In order to adjust the fan belt tightness.
3, when installing the fan bracket, must let the bracket and the foundation plane level be consistent, when necessary in the ventilator side installment angle carries on the reinforcement.
4, after the installation of the fan, to the surrounding tightness of the view. If there is open space, may use the sunlight board to seal the glass glue.
End of exhaust fan installation
1. After installation, check the inside of the fan to see if there is something left and sundry. Use the hand or lever to toggle the fan leaves, to see if there is too tight or rub the appearance, there is no obstruction of the change of goods without abnormal appearance, can be tested.
2, when the operating fan oscillation or the motor has "hum" abnormal movement or other abnormal appearance should be stopped to view, to be corrected after the operation.
Ventilation Installation Considerations
The ventilator must be solid and strong when installed, and it is 2 apart from the ground. 3m above;
The gap between the fan and the roof must reach above 5CM.
Suction ceiling fan Do not install in the smoke, dust more places, at the same time to avoid installation in the vicinity of High-temperature sources.
The wall of the electric fan can be ventilated in each place, also can be used to smoke.